The CPS is a highly efficient LED canopy luminaire that is lightweight and easy to install. It features a compact, low-profile design. The CPS has field-selectable outputs and three field-selectable color temperature options. It produces bright, uniform illumination providing added security lighting. 0-10V dimming down to 10 percent comes standard. An optional 360-degree bi-level and daylight harvesting microwave sensor can be ordered separately. The CPS is available in black or white finish, depending on the model. Applications: Suitable for most canopy applications - gas stations, pathways, perimeter lighting, storage areas, underpasses Lumen Output: 2,890 to 8,320 lumens Max Lumens Per Watt: 143 Predicted Lifetime: 50,000 hrs Finish Options: Black and white (CPS SEL40 model); black only (CPS SEL60 model) Warranty: 5 year limited system warranty Certifications: ETL listed for wet locations. IP65 rated. RoHS compliant Durability The CPS has a one-piece, sealed, die cast aluminum housing. The UV-stabilized optical lens is made of frosted polycarbonate. It comes in black or white finish, depending on the model.

The CSB LED Select Canopy Light is a highly efficient luminaire suitable for most canopy applications. It features three field-selectable color temperature options - 3000K, 4000K, and 5000K. It also features three selectable outputs, from 6,800 lumens to 10,500. It can be surface or pendant mounted using 3/4" electrical conduit for added flexibility. An optional microwave sensors provides multi-level controls based on motion and/or daylight detection, allowing for maximum energy savings. Applications: Suitable for most canopy applications - gas stations, pathways, loading docks, storage areas Lumen Output: From 6,821 in the "Low" 3000K setting to 10,506 in the "High" 4000K setting Max Lumens Per Watt: 163 Predicted L70 Lifetime: 149,000 hrs Warranty: 5 year limited system warranty Certifications: cULus listed for wet locations. IP65 rated. IK08 impact rated lens Built to last The CSB features a die cast aluminum housing with an aesthetically pleasing dark bronze or white powdercoat finish. The lens is made of durable polycarbonate.

The FLK is a high performance LED flood light with three field-selectable color temperature options. It is offered with multiple mounting options for maximum versatility. An integrated dusk-to-down photocell comes standard on all models, and can be enabled or disabled from a simple dip switch on the unit. The FLK features uniform, wide flood distribution (NEMA 7H x 7V). Applications: Suitable for most exterior flood light applications - security lighting, parking lots, sign lighting, building facades Lumen Output: From 1,920 to 14,300 lumens Max Lumens Per Watt: 145 Predicted L70 Lifetime: >54,000 hours (reported) and >100,000 hours (calculated) Warranty: 5 year limited system warranty Certifications: UL certified for wet locations, IP65, IK06 Impact Rating, RoHS compliant Durable design The FLK housing is constructed of durable die cast aluminum in a dark bronze powder coat finish. It features a built-in glare visor. The lens is made of tempered glass.

The PFK is a high performance, high power LED flood light with selectable outputs and color temperatures. The PFK has two selectable output settings, and three selectable CCTs. It comes with both a slip-fitter knuckle and trunnion mount for added versatility. There are multiple flood distributions to choose from. An integrated NEMA 3-pin twist-lock receptacle with photocell and shorting cap is included standard on all models. Applications: Suitable for most exterior street or area light applications: street lighting, parking lots, sign lighting, building facades, sports courts Lumen Output: 13,200 to 40,600 lumens Max Lumens Per Watt: 145 Predicted L70 Lifetime: >54,000 hours (reported); >100,000 hours (calculated) Warranty: 5 year limited system warranty Certifications: UL listed for wet locations. IP65-rated. RoHS compliant Durable and reliable The durable PFK features a housing made of die cast aluminum. It is coated in a dark bronze powder coat finish.

The PFxE is an efficient LED flood light suitable for exterior use. It comes in two sizes. The PF1E is a 20-watt luminaire producing 2,148 lumens. the PF2E is a 50-watt unit producing 5,006 lumens. The PFxE features wide beam flood distribution, providing even illumination over the target area.

Applications: Suitable for most exterior floodlight applications
Lumen Output: 2,148 lumens in the PF1E, 5,006 in the PF2E
Max Lumens Per Watt: 108.5 (PF1E)
Predicted L70 Lifetime: >50,000 hours
Warranty: 5 year limited system warranty
Certifications: UL listed for wet locations. IP66-rated

The AED is a versatile LED area light suitable for many exterior site lighting applications. It features high performance LED technology and a 3-pin photocell receptacle standard. The "LW" model features 6kV surge protection, while the "MD" model has 10kV surge protection. The housing is made of precision die cast aluminum with a chip and fade resistant textured polyester bronze powdercoat finish. Applications: Suitable for most exterior site lighting applications - parking lots, loading docks, roadways, sight lighting Lumen Output: 13,499 and 20,249 lumens Max Lumens Per Watt: 135 Predicted L70 Lifetime: >70,000 hours Warranty: 5 year limited system warranty Certifications: UL listed for wet locations, IP65 Mounting options The AED comes standard with adjustable slipfitter and tenor arm for square pole or wall mounting. The slipfitter fits 2 3/8" to 2 1/2" round tenons if included tenon arm is not needed.

The ADS is an LED dusk to dawn area light with field selectable output and color temperatures. There are three selectable CCTs - 3000K, 4000K and 5000K. It features an integral photocell and Type 5S optics. There are three selectable wattages - 35W, 50W and 65W. Wattage and CCT are easily adjusted in the field. Simply remove the cap from the top of the fixture to access the dip switches underneath, which adjust wattage, CCT and photocell settings. Applications: Suitable for most exterior site lighting applications: parking lots, entry ways, loading docks, pathways, building security Lumen Output: 4,375 lumens at 35W; 6,250 at 50W; 8,125 at 65W Max Lumens Per Watt: 125 Predicted L70 Lifetime: 50,000 hours Warranty: 5 year limited system warranty Certifications: UL listed for wet locations. IP66 rated, RoHS Durable, long-lasting construction The housing of the ADS is constructed of durable, corrosion resistant, cold-forged aluminum, with a bronze finish. The lens is made of polycarbonate.

The WPK is a high performance traditional LED wall pack with three field selectable color temperatures (3000K, 4000K, 5000K). It features 0-10V dimming drivers down to 10 percent. Each model comes standard with an integrated dusk-to-dawn photocell. The WPK is compatible with LED emergency backups. Applications: Suitable for most exterior wall mount applications: industrial, commercial, retail Lumen Output: From 4,885 to 17,865 lumens Max Lumens Per Watt: 156 Predicted L70 Lifetime: >54,000 hours (reported) and >100,000 hours (calculated) Warranty: 5 year limited system warranty Certifications: UL certified for wet locations, IP65, IK06 Impact Rating, RoHS compliant Durable design The WPK's housing is constructed of heavy duty die cast aluminum in a durable dark bronze powder coat finish. The lens is made of borosilicate glass. It features five 1/2" threaded conduit hubs - one on the back and one on all four sides.

The WDS is a highly efficient LED wall pack with field-selectable color temperature and output. There are three color temperatures (3000K, 4000K, and 5000K), and four outputs (40W, 50W, 60W, 80W) to choose from. The WDS features 0-10V dimming down to 10 percent. It utilizes Type 2 optics for even distribution. Applications: Suitable for most exterior wall mount applications - industrial, retail, commercial Lumen Output: From 5,212 ("Low" setting) to 10,399 ("Very High" setting) Max Lumens Per Watt: 130 Predicted L70 Lifetime: 50,000 hours Warranty: 5 year limited system warranty Certifications: ETL listed for wet locations. IP65 rated. Durable design The WDS housing is constructed of durable, weather resistant, die cast aluminum with a bronze finish. The optical lens is UV-resistant polycarbonate.

The WPS LED select wall pack is a high performance wall pack with field-adjustable color temperature and output settings. It is available in two sizes – small (WPS S) and large (WPS L). Each has four output settings – 20W/30W/40W/50W for the WPS S, and 80W/90W/100W/120W for the WPS L. There are three CCT settings – 3000K, 4000K and 5000K. The WPS housing is constructed of durable weather resistant, die-cast aluminum. The lens is UV-resistant polycarbonate. The WPS is available in white or bronze finish.

Applications: Suitable for most exterior wall mount applications – industrial, retail, commercial
Lumen Output: 2,300 to 6,300 in the WPS S; 9,600 to 14,500 in the WPS L
Max Lumens Per Watt: 127.0
Predicted L70 Lifetime: 50,000 hours
Warranty: 5 year limited system warranty
Certifications: ETL listed for wet locations. IP65 rated

Field-selectable wattage and CCT

The wattage/output and color temperatures on the WPS are easily adjustable in the field via switches on the unit. There are four output settings, and three CCT settings (3000K, 4000K, 5000K).

The DEM features a 4.8V long-life, maintenance-free, rechargeable NiCd battery. An internal solid-state transfer switch automatically connects the internal battery to LED board and LED lamp heads for minimum 90-minute emergency illumination. The DEM features 2 LEDs per head (6 watts total per unit). A fully automated solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Lumen Output: 350 lm when running on DC mode, 1,286 when running on AC mode
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, certified to CEC under Title 20 Regulations (optional)
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Lumen Output: 350 lm when running on DC mode, 1,286 when running on AC mode
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, certified to CEC under Title 20 Regulations (optional)

Options and colors

The DEM housing features die cast aluminum construction, sealed and gasketed, with a durable powder coat finish. It is available in four housing colors: white, black, bronze and nickel. The refractor is prismatic polycarbonate. Photocells come standard. The self-diagnostic test feature continually diagnoses the performance of the luminaire, and tests the system to ensure reliable operation and to meet electrical and life safety codes.

The EMEW is an energy efficient exit/emergency unit suitable for wet locations. It provides long life red or green exit sign illumination. Each ultra-bright, long life LED lamp head features 3 LEDs per head. An internal solid-state transfer switch automatically connects the internal battery to the LED board and lamp heads for a minimum of 90 minutes of emergency illumination. A discharged battery can be recharged in 24 hours. The EMEW is available in white, black or gray.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, Certified to CEC under Title 20 regulations
The EMEW includes a die-cast aluminum mounting canopy for top or end mount. A universal knockout pattern on the back plate allows for wall mounting as well. The housing is constructed of 5VA flame retardant and UV stabilized polycarbonate. The lens is high-impact resistant, UV stabilized polycarbonate. The enclosure is corrosion resistant with engineering grade silicone gasket.

The EMEF provides energy efficient, long life red or green LED exit sign illumination. This unit has many certifications – including NSF, IP66, and UL certified for use in food service operations. The EMEF features fully adjustable, ultra-bright 3.3W MR-16 base white LED lamp heads for optimized center-to-center spacing. The 12W and 15W models feature 6V/12V long life, maintenance-free rechargeable NiCd batteries, while the 28W option features a 6V/12V rechargeable lead acid battery. The EMEF offers 4.8W, 7.8W and 20.8W of remote capacity standard on the 12W, 15W and 28W models. A fully automated solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. NiCd battery prorated for 5 years. Lead acid battery prorated for 2 years.
Certifications: UL listed for wet locations, UL certified for use in food service operations. Other certifications – NEMA 4X-rated, IP66, UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes

Installation and construction

The housing on the EMEF is constructed of reinforced polycarbonate in white, gray or black. The corrosion-resistant enclosure features a one-piece, high-impact resistant, UV-stabilized polycarbonate lens and molded gasket with stainless steel screws. A polycarbonate mounting canopy is included for top or end mount. A universal knockout pattern on the back, for back mounting, is gasketed for a watertight seal.

For use in damp or wet locations where exit signage is needed.
Ultra-bright, long-life red or green LED. Dual 120/277V.
Unique bi-color LED indicator light alerts occupant on battery condition (green = normal; red = check battery).
4.8V long-life, maintenance-free rechargeable NiCd battery.
Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automated solid-state, two-rate charger initiates battery charging to recharge.
Custom signs available with custom wording.
Corrosion-resistant enclosure with engineering grade silicone gasket.
Polycarbonate mounting canopy included for top or end mount.
UL listed for wet locations. Other certifications: UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes.
5 year limited warranty on housing and electronics. Battery prorated for 5 years.

Single Face. Double. R. G. Red. Green. Dual voltage. Housing color. W. B. G. White. Black. Gray. faceplate. face plate. CW. cold weather. AC Only. EM. Battery Backgup. SD. Self-diagnostics. Self diagnostics. TP. Tamper-proof. Tamper proof. 2C. Dual circuit. Custom wording.
WLE1R. WLE 1R. WLE1 R. WLE 1 R.
WLE1G. WLE 1G. WLE1 G. WLE 1 G.

WLE2R. WLE 2R. WLE2 R. WLE 2 R.
WLE2G. WLE 2G. WLE2 G. WLE 2 G.

The EMW features semi-recessed, ultra-bright, long-life LED lamp heads. Adjustable LED lamp heads allow for optimal center to center spacing. It has a 6V long-life, maintenance-free, rechargeable and sealed lead acid battery. An internal solid-state transfer switch automatically connects the internal battery to the LED board and lamp heads for a minimum of 90 minutes of emergency illumination. A discharged battery can be recharged in 24 hours with its fully automated solid-state, two-rate charger.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, Certified to CEC under Title 20 regulations (options)

The EMW features semi-recessed, ultra-bright, long-life LED lamp heads. Adjustable LED lamp heads allow for optimal center to center spacing. It has a 6V long-life, maintenance-free, rechargeable and sealed lead acid battery. An internal solid-state transfer switch automatically connects the internal battery to the LED board and lamp heads for a minimum of 90 minutes of emergency illumination. A discharged battery can be recharged in 24 hours with its fully automated solid-state, two-rate charger.
Spec Sheet High Res Image
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, Certified to CEC under Title 20 regulations (options)

The EMRW is a wet location emergency unit with a remote capacity of 3.7 watts standard in operating temperatures of 0º C to 50º C. It features ultra-bright, long life white LED lamps heads, with 15 LEDs per head. An internal solid-state transfer switch automatically connects the internal battery to the LED board and lamp heads for a minimum of 90 minutes of emergency illumination. A discharged battery is recharged in 24 hours using the EMRW’s fully automated solid-state, two-rate charger.
Applications: Suitable for indoor or outdoor use where emergency lighting is needed
Warranty: 5 year limited warranty on housing and electronics. Battery pro-rated for 5 years
Certifications: UL listed for wet locations. Other certifications – UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes, Certified to CEC under Title 20 regulations (optional)

The REH provides illumination from ultra-bright, long-life white LED lamp heads. There are eight LEDs per head (1 watt total per head). The lamps heads are adjustable to allow for optimal center-to-center spacing. The REH is powered from low voltage power source with low voltage wiring (not provided). The outdoor “WP” model is constructed of die cast aluminum, and is sealed and gasketed with a glass lens. The REH can be wall or ceiling mounted.
Adjustable LED lamp heads allow for optimal center-to-center spacing.
Compatible with LumenFocus EME LED Exit/Emergency Combo.
Universal mounting base mounts to single-gang switch box. Suitable for wall or ceiling mount.
Indoor model: injection molded 5VA flame retardant, high-impact resistant. Outdoor “WP” model: die cast aluminum, sealed and gasketed with glass lens.
Ul listed with approved LumenFocus products. Other certifications: UL924, NFPA 101 Life Safety Code, NEC, OSHA.
5 year limited warranty on housing and electronics.

REH 2 9.6. REH 1 9.6. REH 2 9.6 WP. REH 2 9.6-WP. REH 1 9.6-WP. REH 1 9.6 WP. 1 lamp head. 2 lamp heads. 9.6 volt. WP. Weather-proof. Weather proof. SD. Self-diagnostics. Self diagnostics. HL. High lumen 12-LED 12 led heads. 1.5W watts per head.